AEMC 203, User Manual

Page: 32 / 44

32
4.2.2 AC Voltage Measurement
Measurement
range
0.15 to 59.99V 60.0 to 599.9V 600 to 1000V RMS
1400V peak (1)
Specified
measurement
range (2)
0 to 100% of the measurement range
Accuracy
0.15 to 5.99V
± (1% R + 10cts)
6.00 to 59.99V
± (1% R +3cts)
± (1% R +3cts)
Resolution 0.01V 0.1V 1V
Input impedance 10M
Ω
Note (1) Above 1000V (RMS), a repetitive beep indicates that the voltage
being measured is greater than the safety voltage for which the
device is guaranteed. The display indicates "OL".
- Bandwidth in AC = 3 kHz
Note (2) Any value between zero and the min. threshold of the measurement
range (0.15V) is forced to show "----" on the display.
Specific Specifications in MAX/MIN mode (from 10Hz to 1kHz, and from
0.30V in AC):
•
Accuracy: add 1% R to the values of the table above.
•
Capture of the extreme: approximately 100ms.
4.2.3 DC Current Measurement
Measurement
Range (2)
0.00 to
59.99A
60.0 to
599.9A
600 to 900A (1)
Specified
measurement range
0 to 100% of the measurement range
Accuracy (2)
(zero corrected)
± (1% R + 10cts) ± (1% R +3cts)
Resolution 0.01A 0.1A 1A
Note (1) The display indicates “+OL” above 1800A and “-OL” below -1800A
in REL mode. The "-" and "+" signs are displayed.
Note (2) The residual current at zero depends on the remanence. It can be
corrected by the “DC zero” function of the HOLD button.