Power & Energy Logger Model PEL 105 - Quick Start Guide
7
Precautions Before Use
This instrument complies with safety standard IEC 61010-2-030, the leads
comply with IEC 61010-031 for voltages of 1000 V in measurement CAT III or
600 V in measurement CAT IV, and the current sensors comply with
IEC 61010-2-032.
Failure to observe the safety instructions may result in electric shock, fire,
explosion, destruction of the device, or destruction of the installations.
■
The operator and responsible authority must read and understand all
precautions needed before using the instrument. This instrument requires
the user to have knowledge and awareness of electrical hazards.
■
Observe the conditions of use, including temperature, relative humidity,
altitude, pollution degree, and location of use.
■
Do not use the instrument if it appears damaged, incomplete, or improperly
closed.
■
Before each use, check the condition of the insulation on the leads,
housing, and accessories. Any items with a degree of deteriorated
insulation must be set aside to repair or discard.
■
All troubleshooting and calibration checks must be performed by
competent, accredited personnel.
