AEMC instruments 2136.35 User Manual Download Page 87

Page: 87 / 144

Power Quality Analyzer PowerPad

IV Model 8345

Press to start the alarm recording at the programmed time

Press the

button in the function bar to start an alarm recording

programmed in the configuration (§ 3.4.5) at the end of the current minute

plus one minute

Press the button in the function bar to modify the alarm recording

configuration

12.2 THE LIST OF ALARM RECORDINGS

Press

to view the previous alarm recordings

Each entry in the list includes the alarm recording’s name, start date, start

time, end date, and end time

Press to erase the selected alarm recording

To erase all of the alarm recordings, refer to § 3.3.4.
If the end date is red, the recording could not continue to the planned end date

because of:

■

A power supply problem (the instrument turned off due to low battery)

■

A write error on the SD card

To learn what the error number means, use the help button

Progress of alarm

recording

The alarm recording

is in progress

Used memory

To view the different

pages

Summary of Contents for 2136.35

















































































































































Search results

Summary of Contents for 2136.35

Reviews:

AEMC instruments 2136.35, User Manual, Page: 87 / 144

Search results

Summary of Contents for 2136.35

Reviews: