AEMC instruments 1015 User Manual Download Page 22

Page: 22 / 24

Megohmmeter Model 1015

5.3 REPAIR AND CALIBRATION

To ensure that your instrument meets factory specifications, we recom

mend that it be sent back to our factory Service Center at one-year intervals

for recalibration or as required by other standards or internal procedures.

For instrument repair and calibration:

You must contact our Service Center for a Customer Service Authorization

Number (CSA#). Send an email to

[email protected]

requesting a CSA#,

you will be provided a CSA Form and other required paperwork along with

the next steps to complete the request. Then return the instrument along

with the signed CSA Form. This will ensure that when your instrument

arrives, it will be tracked and processed promptly. Please write the CSA#

on the outside of the shipping container. If the instrument is returned for

calibration, we need to know if you want a standard calibration or a cali-

bration traceable to N.I.S.T. (includes calibration certificate plus recorded

calibration data).

Ship To:

Chauvin Arnoux

, Inc. d.b.a. AEMC

Instruments

15 Faraday Drive ▪ Dover, NH 03820 USA

Phone: (800) 945-2362 (Ext. 360) / (603) 749-6434 (Ext. 360)

Fax: (603) 742-2346

E-mail:

[email protected]

(Or contact your authorized distributor.)

traceable to N.I.S.T.

NOTE: You must obtain a CSA# before returning any instrument

5.4 TECHNICAL ASSISTANCE

If you are experiencing any technical problems or require any assistance

with the proper operation or application of your instrument, please call,

e-mail or fax our technical support team:

Chauvin Arnoux

, Inc. d.b.a. AEMC

Instruments

Phone: (800) 343-1391 (Ext. 351)

Fax: (603) 742-2346

E-mail:

[email protected]

www.aemc.com

Summary of Contents for 1015

























Search results

Summary of Contents for 1015

Reviews:

Brands by name

Popular brands

AEMC instruments 1015, User Manual

Search results

Summary of Contents for 1015

Reviews:

Brands by name

Popular brands