3
Read and understand these instructions BEFORE attempting to install this product.
Failure to follow installation instructions and not using the provided hardware may
damage the intake tube, throttle body and engine.
The AEM
®
intake system is a performance product that can be used safely during mild
weather conditions. During harsh and inclement weather conditions, you must return
your vehicle to stock OEM air box and intake tract configuration. Failure to follow these
instructions will void your warranty.
1. Preparing Vehicle
a. Make sure vehicle is parked on level surface.
b. Set parking brake.
c. If engine has run in the past two hours, let it cool down.
d. Disconnect negative battery terminal.
e.
Raise the front of the vehicle with a jack. Refer to your owner’s manual for proper jack and jack stand
placement to properly support vehicle. Support your vehicle using properly rated jack stands before wheel
removal or while working under the vehicle.
NEVER WORK UNDER A VEHICLE WITHOUT USING JACK STANDS.
f. Remove front driver side wheel.
g. Do not discard stock components after removal of the factory system.
2. Removal of stock system
a. Factory air box system installed.
b. Release the clip on top of the inlet pipe.
