AEM Performance Electronics
Phone (8am-5pm M-F PST): 310-484-2322
2205 W 126
th
Street, Unit A
Fax: 310-484-0152
Hawthorne, CA 90250
1. Go to the Setup-Outputs group and select the PDU8-1 and PDU8-2 tabs.
2. Review the pinout table for VCU functions for each output channels. These output
functions are not re-assignable.
3. Manual override settings are available for testing each output. Set the _OvrVal to 1
then set the _OvrSts to
override
to override the the output logic.
4. Refer to the user instructions provided with the AEM PDU8 for more information on
hardware capabilities and wiring.
CAUTION!
Do not manually override high voltage contactor drivers when they are connected to the
battery pack.
6/3/2020, Revision C
AEM EV VCU200 User Guide
Page
13
of
15
