8
© 2017 AEM Performance Electronics
P/N 30-3508
Step 5
If a wideband UEGO sensor was
purchased, put the car on a vehicle lift
(or jack stands).
Weld in a bung or use an existing O2
sensor bung that is pre catalytic
converter for optimal accuracy.
Use a 7/8” wrench to install the
wideband UEGO sensor (OEM location
shown).
The UEGO extension harness (sold
separately) should be routed away from
moving parts and should not come in
contact with excessively hot objects.
Step 6
To get the UEGO extension harness into
the cockpit, use the factory grommet on
the left side firewall. RHD vehicles will
differ.
Pull grommet from firewall. Cut a small
slit in grommet and push Deutsch
connector through. Reattach grommet to
firewall. Mate extension harness to the
Deutsch connector found in the AEM
adapter.
If any of the auxiliary connections are to
be installed now is the time to assemble
these.
Reconnect the battery, and connect to
the Infinity Tuner software. After all of the
components are verified, reinstall the
kick panel and door sill.
