3
Read and understand these instructions BEFORE attempting to install this product.
Failure to follow installation instructions and not using the provided hardware may
damage the intake tube, throttle body and engine.
1. Preparing Vehicle
a. Make sure vehicle is parked on level surface.
b. Set parking brake.
c. If engine has run in the past two hours, let it cool down.
d. Disconnect all negative battery terminals.
e. Do not discard stock components after removal of the factory system.
2. Removal of stock system
a) Before removing any of the O.E. components,
label
each individual part so that no components
become mixed up during the installation process
.
b) Remove plastic intake duct from the front of the
engine by removing the plastic clips and pulling the
duct straight forward. To remove the clips, use a
pointed devise and push in the middle of the clips.
c) Remove the breather hose from the valve cover
by pulling it off.
d) Unclip the throttle cable from the side of the air filter
housing.
Throttle Cable
