c) Place rubber elbow with two hose clamps onto the
rottle body. The long end attaches to the throttle body.
d) Insert upper SRS pipe into rubber elbow. Attach
support bracket to engine using the supplied bolt and
th
washer. Place aluminum tab behind the plastic tab.
e) Install the supplied breather hose as shown. Secure
oth ends with supplied ¾” hose clamps.
f) Install rubber mount in threaded hole as shown.
b
g) Install the air filter to the MAF sensor adapter.
ighten the air filter hose clamp.
h) Install MAF sensor to pipe using the proper hose
clamp. Attach support bracket as shown. Do not
T
completely tighten the lock nut. Plug in MAF sensor.
See next step for proper installation.
