6
e. Install the intake tube as shown, sliding the bracket
below the washer on the rubber mount. Do not fully
tighten the nut to allow some movement during installa-
tion.
f. Install the AEM DryFlow filter using the provided hose
clamp onto the intake tube.
h. Insert the intake tube into the coupler. Position the
tube for best fit and tighten the hose clamp.
i. Connect the factory PCV hose to the supplied hose and
secure using the factory spring clamp.
j. Connect the MAF sensor harness to the MAF sensor
and secure the harness on the heatshield. Tighten the
nut on the bracket to secure the tube.
g. Carefully lower the assembly into the engine bay. It
will take some maneuvering to seat the heatshield as-
sembly into place. Fasten using the provided bolt and
the nuts removed in step 2g.
