4
e. Loosen the hose clamp securing the factory intake to
the throttle body.
f. Unlatch the air box lid and remove the air box lid and
intake resonator assembly out of the engine bay.
g. Remove the two nuts and the bolt securing the air
box base in the engine bay. The nuts will be reused in
step 3g.
h. Lift the air box up and out of the engine bay. Tuck the
MAF sensor harness towards the engine so it is out of
the way.
i. Remove the MAF sensor from the air box lid assembly.
Replace the screws into the air box lid for safe keeping.
Do not discard any of your stock equipment.
