6
3.
Installation of AEM
®
intake system.
a.
When installing the intake system, do not completely tighten the hose clamps or mounting hardware until
instructed to do so.
a. Install the PCV grommet and the MAF sensor using
the factory screws.
d. Using the step coupler and provided hose clamps,
install the intake tube as shown. Connect the PCV tube
at this time. Do not fully tighten the hose clamps at this
time.
b. Install the tall rubber mount on to the shock tower
bolt hole.
c. Install the shorter rubber mount on the lower air box
bolt hole.
