3
Read and understand these instructions BEFORE attempting to install this product. Failure to follow installation
instructions and not using the provided hardware may damage the intake tube, throttle body and engine. If you
need any assistance please call1
-
800
-
858
-
3333 to speak with a representative in our Customer Service Center
before returning the product.
1.
Preparing Vehicle
a.
Make sure vehicle is parked on level surface.
b.
Set the parking brake.
c.
If engine has run in the past two hours, let it cool down.
d.
Disconnect negative battery terminal.
e.
Do not discard stock components after removal of the factory system.
f. Open the air intake kit package and make sure all parts are included.
2.
Removal of stock system
a. Remove the engine cover by pulling up gently. Use
care not to lose the grommets in the engine cover as
they tend to fall out easily.
b. Disconnect the Mass Air Flow (MAF) sensor harness
from the sensor.
c. Remove the PCV tube and wire harness from the rub-
ber intake hose.
d. Loosen the hose clamp securing the hose to the
throttle body.
Tools Needed:
Screwdrivers
10mm Socket
Long Extension
Socket Driver
Side Cutters
4mm Hex Key
Optional:
Small Torque
Wrench
