AEL IR 4400, User Manual

Page: 16 / 23

15
System Setting Change PIN:
After selecting the Manual Input, press ENTER until NEXT is highlighted, then
press DOWN twice until the arrow after SAVE is highlighted in blue. Press
ENTER. System setting appears providing information on:
To change any of the settings, press UP until the desired function is
highlighted in blue. For example, to change the PIN, press UP until CHANGE
PIN is highlighted. Press ENTER and follow the instructions. To change
other settings, press UP to select the setting highlighted in blue. Then press
ENTER to highlight the % in orange. Press UP to increase the value or
DOWN to decrease.
Stopping the unit:
If at any time you wish to stop the treatment, press the red START / STOP
button. The following will appear on the screen:
You can then restart the treatment. CONT will be highlighted in blue. Press
ENTER, an image of the laser safety eyewear will appear, then press the red
START / STOP button.
In case of emergency, press the 2 restart buttons (see diagram)
simultaneously and the AEL IR 4400 will switch off.
Changing a Dosage:
After completing a treatment and you wish to change the dosage