AEL IR 4400, User Manual

Page: 11 / 23

10
The PIN is factory set to 9999 by Laserex. The first 9 will appear on the
screen. Press ENTER until the second asterisk becomes a 9, then press
ENTER again until 9999 appear on the screen. After the 4
th
asterisk become
a 9 the word OK will appear in yellow alongside ENTER on the screen. Press
ENTER
and ‘correct’ appears on the screen in green. If you make a mistake
when entering a number, press ENTER for a few seconds and the digit
returns back to an asterisk. Then input the correct digit. The next screen is:
Explanation:

Continue Last: enters the previous treatment.

Load memory : enters a treatment dosage stored in memory.

Manual Import: allows one to manually enter the dosage
To enter any of these, press DOWN until the correct setting is highlighted and
then press ENTER.
Continue Last:
From Data Source screen and with Continue Last highlighted in blue, press
ENTER and the most recent treatment protocol will appear. Press ENTER
with CONT highlighted in blue. ‘Safety glasses must be worn’ will appear in
red along with an image of safety eyewear glasses. START appears in red
along with the words Laser Ready! Place the laser safety eyewear on. Press
the red START / STOP button to deliver the dosage. An audible beep will be
heard whilst the dosage is being delivered.
Load Memory:
At the Data Source screen press DOWN so that Load Memory is highlighted
in blue. Press ENTER. M:1 will be highlighted in blue. If there is more than
one memory entered, press UP to select the desired treatment then press
ENTER. OK will be highlighted and then press ENTER and the stored
dosage appears on the screen. NEXT is highlighted and Laser Standby!