AEL IR 4400, User Manual

Page: 14 / 23

13
Press UP until INT 1 is highlighted, then press ENTER and EN (enabled)
appears. Repeat the above until INT 2 is also enabled. If you are only using
one RF Interlock, make sure that at least one of the Interlocks is enabled. If
only one Interlock is enabled, say INT 1, press DOWN. INT 2 will appear as
DIS. OK will then appear, highlighted in blue. Press ENTER. NEXT will
appear highlighted in blue. Press ENTER. Laser Standby! will appear in
green. CONT will be highlighted in blue, press ENTER and an image of laser
safety eyewear appears along with the words ‘Safety glasses must be worn’
appearing in red. The next screen states:
START will appear in red.
It is now advisable to have the laser ready at the position where the subject is
to receive treatment. Press the red START / STOP button and the AEL IR
4400 delivers the requested dosage. An audible beep will be heard and the
Laser Emission indicator button on the front of the unit will be flashing in
green. A timer will appear indicating the amount of time left for treatment.
The AEL IR 4400 will countdown the treatment time. The minutes and
seconds left will appear in orange text on the screen. The words Laser ON!
will be in red on the screen.
Repeating a dosage:
Upon completion of the treatment, a long beep will be heard, followed by the
words Laser Standby! in green on the screen. NEXT will be highlighted in
blue. Press ENTER, an image of laser safety eyewear appears along with
the words
‘Safety glasses must be worn’ in red. Then press the START /
STOP button. START will be highlighted in red. The same dosage will be
delivered.