5
www.aeg.com
AEG reserves the right to change products, information and specifications
without notice.
NB: Remove the batteries from the product before scrapping. Follow your
country’s rules for collection of batteries and electrical products.
Enjoy a great cleaning experience with VX9!
TIPS ON HOW TO GET THE BEST RESULTS
NOZZLE/ACCESSORY
USE FOR:
NOZZLE/ACCESSORY
USE FOR:
K. 3in1 accessory tool*
3 tools in 1:
1. Dusting tool for hard surfaces
(bookshelves, skirting boards etc).
2. Upholstery tool for textiles (curtains,
upholstery etc).
3. Crevice tool for narrow spaces
(behind radiators etc).
V. PrecisionFlow nozzle*
W. PrecisionFlow LED
nozzle
(with front lights)*
Universal nozzle:
- For all floor types, secures best dust pick up
on both carpets and hard floors.
- Change nozzle setting with the pedal. Icon
will show recommended floor type.
- Front light helps to detect dust and
dirt in dark spaces (under furniture etc).
PrecisionFlow LED only
1
2
3
X. Turbo nozzle*
Carpet nozzle:
- Brushes and vacuums at the same
time (best pick up of hair, fibres etc).
- Brush roller is driven by the airflow of
the vacuum cleaner.
- Not suitable for carpets with very
deep piles and long fringes, anti-slip
carpets like door mats or water
resistant carpets. Use universal nozzle
instead.
Y. Mini Turbo nozzle*
Upholstery nozzle:
- Brushes and vacuums at the same time (best
pick up of hair, fibres etc).
- For textile furniture, car seats, mattresses etc.
- Brush roller is driven by the airflow of the
vacuum cleaner.
- Not suitable for carpets with very deep pile
and long fringes as it can get stuck in the
rotating brush roll.
Z. ParkettoPro nozzle*
Hard floor nozzle:
- For gentle cleaning of hard floor
(parquet, wooden floor, tiles etc).
- Best dust pick up on hard floor with
crevice.
AA. FlexProPlus nozzle*
Hardfloor nozzle:
- For reach under/between furniture, corners
and other obstacles.
- Can easily turn 180 degrees for direct access
to narrow spaces.
AB. Long crevice nozzle*
Extra long tool:
- For areas hard to reach (top of
shelves etc).
- For narrow spaces (behind radiators,
under car seats etc).
Models with manual power regulation
– follow graphics on cleaner for optimal performance.
Models with AUTO-function automatically adjust the suction power
in order to give an optimal cleaning performance and comfort on every surface. For
manual regulation, follow graphics for optimal performance.
TROUBLESHOOTING
PROBLEM
SOLUTION
The vacuum cleaner does not start
• Check that the cable is connected to the mains.
• Check that the plug and cable are not damaged.
• Check for a blown fuse.
• Check if the battery indicator lamp in the remote control handle responds (certain models only).
The s-bag® indicator light is illuminated
• Check if the s-bag® is full or blocked.
• If you have already changed the s-bag®, change the motor filter.
The filter indicator light is illuminated (only at
specific models)
Change, or wash (if washable), the exhaust filter.
The cleaner stops
The cleaner might be overheated: disconnect it from the mains; check if the nozzle, tube, hose or filters are
blocked. Let the cleaner cool down for 30 minutes before plugging it in again.
If the cleaner still does not work, contact an authorized AEG service centre.
Reduction of suction capacity versus normal
• Check if the s-bag is full or blocked.
• Check if the motor filter is clogged and needs changing.
• Check if nozzle is blocked and needs to be cleared.
• Check if hose is blocked by squeezing it gently. However, be careful in case the obstruction has been caused by
glass or needles caught inside the hose.
Note: The warranty does not cover any damage to the hose caused by cleaning it.
Water has been sucked into the vacuum
cleaner
It will be necessary to replace the motor at an authorized AEG service centre.
Damage to the motor caused by the penetration of water is not covered by the warranty.
For any further problems, contact an authorized AEG service centre.
GB
DE
AR
ES
FA
FR
GR
IT
NL
PT
