AEG VH 211, Operating And Installation Instructions

Page: 10 / 26

10
For the Fitter
2.3 Unit installation
2.3.1 Making secure
The following action should be taken to secure the equipment:
●
screw the supplied hanging bracket ( 3 ) horizontally to the installation wall. – bracket with the cut-
out facing upwards –. Use suitable securing materials (screws, dowels), according to the type of wall.
Using the horizontal and vertical elongated hole, alignment is possible if the fixing hole is out of
true.
●
Hang the unit onto the hanging bracket using the upper vertical recesses of the unit rear panel.
●
Screw up the unit and hanging bracket with the securing screw ( 4 ).
2.4 Electrical connection
Electrical connection can only be made to an AC 230 V ~ 50 Hz supply.
For the purpose of connection, an earthed socket or unit connection box for permanent connection
should be installed at the side of the heating unit, at least 10 cm away from it. In the case of a
permanent connection, the connection cable must not lie against the unit and should be shortened in
such a way (cut off the plug) that it leads directly to the permanent connection box.
The stripped wire ends are tipped with wire end sleeves.
* in the case of operation with external room thermostat (see page 3).
2.5 Handover
Explain the functions of the unit to the user. Draw his or her attention to the safety instructions, in
particular. Hand the operating and installation instructions to the user.
2.6 Technical data
Type VH 211
Dimensions H / W / D mm 400 / 276 / 115
Weight kg 3,0
Connection 1/N ~ 230 V 50 Hz
Output kW 2,0
Temperature adjustment range °C approx. 5 to 35
Frost protection °C approx. 5
Protection class II
Protection mode IP 23, splash-proof
Approvals see unit rating plate
3. Guarantee
For guarantee please refer to the respective terms and conditions of supply for your country.
The installation, electrical connection and first operation of this appliance should be carried out
by a qualified installer.
The company does not accept liability for failure of any goods supplied which are not installed in
accordance with the manufacturer's instructions.
3.1 Environment and recycling
Please help us to protect the environment by disposing of the packaging in accordance with the
national regulations for waste processing.
3.1.1 Recycling of obsolete appliances
Appliances with this label must not be disposed off with the general waste. They must be
collected separately and disposed off according to local regulations.