Problem
Possible solution
The display shows Error code (e.g.
E51
).
Deactivate and activate the appliance. Start
a new programme. If the problem occurs
again, contact the Service centre.
1)
After maximum 5 hours, the programme ends automatically.
2)
It can happen that some area remains humid when drying big items (e.g. bed sheets ).
12.1
If the drying results are
not satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The Heat Exchanger is clogged.
• There was too much laundry in the
appliance.
• The drum is dirty.
• Incorrect setting of the conductivity
sensor ( See chapter "
Settings -
Adjustment of the remaining laundry
moisture degree
" for better setting).
• The airflow slots are clogged.
• Room temperature is too low or too
high ( optimal room temperature 19°C
to 24°C )
13.
TECHNICAL DATA
Height x Width x Depth
850 x 596 x 638 mm (maximal 662 mm)
Max. depth with the appliance door open
1107 mm
Max. width with the appliance door open
958 mm
Adjustable height
850 mm (+ 15 mm - feet regulation)
Drum volume
118 l
Maximum load volume
8
kg
Voltage
230 V
Frequency
50 Hz
Sound power level
66 dB
Total power
800 W
Energy efficiency class
A++
Energy consumption on the standard cotton
programme with the full load.
1)
1,93
kWh
Energy consumption on the standard cotton
programme with the partial load.
2)
1,08
kWh
Annual energy consumption
3)
234,7 kWh
Left-on mode power absorption
4)
0,50 W
Off mode power absorption
4)
0,50 W
www.aeg.com
20
