If the display returns to
the normal mode (the
time of the selected
programme from step 2.
will be displayed), while
setting the degree of
remaining moisture,
press and hold buttons
(
E
) and (
D
) once again to
enter to the "Adjustment
of remaining laundry
moisture" mode
(previously set degree of
remaining moisture will
change into next value).
6.
After 5 s the display returns to normal
mode.
7.3
Water container indicator
By default, the water container indicator
is on. It comes on when the programme
is completed or when it is necessary to
empty the water container.
If a draining kit is installed
(additional accessory), the
appliance automatically
drains the water from the
water container. In this case
we recommend that you
deactivate the indicator of
the water container.
Deactivating the water
container indicator:
1.
Press the on/off button to activate
the appliance.
2.
Wait approximately 8 seconds.
3.
Press and hold touch buttons (
A
) and
(
C
) at the same time.
The display shows one of these 2
configurations:
• The display shows "Off". After 5 s
the display returns to normal
mode.
• The display shows "On". After 5 s
the display returns to normal
mode.
7.4
Buzzer on/off
To deactivate or activate the acoustic
signals, press and hold for approximately
2 seconds touch buttons (
E
) and (
F
) at
the same time.
8.
BEFORE FIRST USE
Rear drum locks are
removed automatically when
dryer is activated for the first
time. Possible to hear some
noise.
It is highly recommended
to start any programme for
the first time without the
load for a few seconds to
ensure that the rear drum
locks are removed
properly.
To unlock the rear drum locks:
1.
Switch on the appliance.
2.
Set any programme.
3.
Press the Start/Pause button.
Drum starts to rotate. Rear drum locks
are deactivated.
If the drum still does not
rotate, please release the
rear drum locks manually (to
do that, please use provided
key).
A
B
ENGLISH
13
