To clean you can use harder side of dish-
washing sponge and bit of vinegar or
dish soap.
To clean the sensor:
1.
Open the loading door.
2.
Clean the surfaces of the humidity
sensor wiping off the metal surface
several times.
10.5
Cleaning the drum
WARNING!
Disconnect the appliance
before you clean it.
Use a standard neutral soap detergent to
clean the inner surface of the drum and
drum lifters. Dry the cleaned surfaces
with a soft cloth.
CAUTION!
Do not use abrasive
materials or steel wool to
clean the drum.
10.6
Cleaning the control
panel and housing
Use a standard neutral soap detergent to
clean the control panel and housing.
Use a moist cloth to clean. Dry the
cleaned surfaces with a soft cloth.
CAUTION!
Do not use furniture
cleaning agents or cleaning
agents which can cause
corrosion.
10.7
Cleaning the airflow slots
Use a vacuum cleaner to remove fluff
from the airflow slots.
11.
TROUBLESHOOTING
Problem
1)
Possible cause
Remedy
The tumble dry-
er does not op-
erate.
The tumble dryer is not connected
to the mains supply.
Connect it to the mains socket.
Check the fuse in the fuse box (do-
mestic installation).
The door is open.
Close the door.
The
On/Off button was not
pushed.
Push the
On/Off button.
The
Start/Pause button was
not touched.
Touch the
Start/Pause button.
The appliance is in standby mode. Push the On/Off button.
www.aeg.com
20
Summary of Contents for T8DER945C
Page 1: ...USER MANUAL EN User Manual Tumble Dryer T8DER945C ...
Page 29: ...ENGLISH 29 ...
Page 30: ...www aeg com 30 ...
Page 31: ...ENGLISH 31 ...
