AEG T8DER945C, User Manual

Page: 22 / 32

Problem
1)
Possible cause Remedy
The drying cycle
is too short.
The load size is small. Select a time programme. The
time value must be related to the
load. To dry one item or a small
amount of laundry we recommend
short drying times.
The laundry is too dry. Select an appropriate time pro-
gramme or a higher dryness level
(e.g.
extra dry)
Drying cycle too
long
6)
The filter is clogged. Clean the filter.
The load is too large. Do not exceed the maximum load
size.
The laundry was not spun suffi-
ciently. Spin the laundry well in the wash-
ing machine.
Too low or too high room temper-
ature - this is not the appliance
malfunction. Ensure a room temperature higher
than +5°C and lower than +35°C.
Optimal room temperature to ach-
ieve best drying results is between
19°-24°C.
1)
If there is an error message on the display (e.g.
E51
): Turn the tumble dryer off and on. Select a new
programme. Touch the Start/Pause button. If the appliance does not operate contact the service centre
and provide the error code.
2)
Follow the programme description — see the PROGRAMMES chapter .
3)
See the
CARE AND CLEANING
chapter.
4)
Only dryers with the Dryness option.
5)
See the HINTS AND TIPS chapter .
6)
Note: After a maximum of 5 hours the drying cycle ends automatically.
11.1
Possible causes of
unsatisfactory drying results:
• The filter is clogged. Clogged filter
makes drying inefficient.
• The airflow slots are clogged.
• The humidity sensor is dirty.
• The drum is dirty.
• Inadequate default dryness level
settings. See chapter
Adjustment of
default dryness level
• Room temperature is too low or too
high. Optimal room temperature is
between 19°-24°C.
12. TECHNICAL DATA
Height x Width x Depth 850 x 600 x 600 mm (maximal 665 mm)
Max. depth with the appliance door open 1100 mm
Max. width with the appliance door open 950 mm
www.aeg.com 22