3
UK
5.2
Installing the cordless handset and charging the batteries (see P5)
t
Insert the 2 supplied batteries into the battery compartment of the cordless handset, observing the
correct polarity (see markings inside battery compartment).
Warning:
Use only the supplied NiMH rechargeable batteries.
t
Place the back cover over the back of the cordless handset and press down until it clicks into place.
t
Place the cordless handset on the charging pod and charge for 15 hours before using the cordless
handset for the first time.
t
The cordless handset will give a double beep when it is properly placed on the charging pod.
t
The battery charging indicator on the charging pod lights up to indicate charging.
Note:
The cordless handset may become warm when the batteries are being charged or during prolonged
periods of use. This is normal and does not indicate a fault.
6
GETTING TO KNOW YOUR PHONE
6.1
Cordless handset overview (see P1)
#
Icon
Meaning
1
In standby mode, press to enter the Main Menu list.
Press to select an item, or to save an entry or setting.
2
In menu mode, press to scroll up.
During a call or message playback, press to increase the volume.
In standby mode, press to access the call log.
3
Press to make or answer a call.
During a call or message playback, press to switch between speakerphone and
earpiece.
4
Press and hold to switch the key lock on or off.
5
During a call, press to send a Flash signal for network services.
6
In standby mode, press to access the redial list.
7
In standby mode or during a call, press to initiate an intercom call or transfer a call.
8
Press to cancel an action.
During pre-dialling, press to delete the last digit entered.
During a call, press to mute the microphone, and press again to resume
conversation.
