AEG SB2E 14.4 T Super Torque, Instructions For Use Manual

Page: 11 / 39

13
SB2E 14.4 T Super Torque SB2E 18 T Super Torque
......................... 13 mm ......................................13 mm
......................... 36 mm ......................................38 mm
......................... 13 mm ......................................13 mm
........................... 8 mm ......................................10 mm
.................... 0-400 min
-1
.............................. 0-450 min
-1
.................. 0-1300 min
-1
............................ 0-1400 min
-1
........................... 21 Nm .........................................25 Nm
........................... 44 Nm .........................................48 Nm
...................... 38/16 Nm ....................................42/18 Nm
.............................340 .............................................420
.............................380 .............................................420
.............................480 .............................................525
........................ 14,4 V ............................................18 V
.....................1,5-13 mm ..................................1,5-13 mm
.......................... 2,5 kg .........................................2,8 kg
........................... 90 dB (A) ....................................90 dB (A)
......................... 101 dB (A) ..................................101 dB (A)
........................... 11 m/s
2
....................................... 11 m/s
2
ENGLISH
TECHNICAL DATA
Drilling capacity in steel ................................................................
Drilling capacity in wood ...............................................................
Drilling capacity in brick and tile ...................................................
Wood screws (without pre-drilling) ...............................................
No-load speed
1st gear .....................................................................................
2nd gear ....................................................................................
Torque *1
Soft wood max. ..........................................................................
Steel plate max ..........................................................................
Static jamming moment, 1st gear/2nd gear ...............................
Screwing capacity with one fully charged battery (1.4 Ah) *2:
5x40 Soft wood .........................................................................
Drilling capacity with one fully charged battery (2,4 Ah):
ø 3 mm Steel plate 1,6 mm .......................................................
ø 6 mm Soft wood 20 mm .........................................................
Battery voltage .............................................................................
Drill opening range .......................................................................
Weight with battery .......................................................................
Typical A-weighted sound levels:
Sound pressure level .................................................................
Sound power level .....................................................................
Wear ear protectors!
Typical weighted acceleration in the hand-arm area ....................
Measured values determined according to EN 50 260.
SAFETY INSTRUCTIONS
Please pay attention to the safety instructions in the attached
leaflet!
Always wear goggles when using the machine. It is
recommended to wear gloves, sturdy non slipping shoes and
apron.
Sawdust and splinters must not be removed while the machine
is running.
When working in walls ceiling, or floor, take care to avoid
electric cables and gas or waterpipes.
Dust that arises when working on material containing asbestos
or stonework containing crystalline silicic acid is harmful to the
health. Please follow accident prevention regulations.
Do not dispose of used battery packs in the household refuse
or by burning them. AEG Distributors offer to retrieve old
batteries to protect our environment.
Remove the battery pack before starting any work on the
machine.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System 3000 chargers for charging System 3000
battery packs. Do not use battery packs from other systems.
No metal parts must be allowed to enter the battery section of
the charger (short circuit risk).
Never break open battery packs and chargers and store only in
dry rooms. Keep dry at all times.
SPECIFIED CONDITIONS OF USE
The electronic battery percussion drill/screwdriver is designed
for drilling, percussion drilling, as well as screwdriving for
independent use away from mains supply.
Do not use this product in any other way as stated for normal
use.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in
conformity with the following standards or standardized
documents. EN 50260, EN 55014-1, EN 55014-2, in
accordance with the regulations 98/37/EC, 73/23/EEC, 89/336/
EEC
Volker Siegle
Manager Product Development
BATTERIES
New battery packs reach full loading capacity after 4 - 5
chargings and dischargings. Battery packs which have not
been used for some time should be recharged before use.
Temperatures in excess of 50
o
C (122
o
F) reduce the
performance of the battery pack. Avoid extended exposure to
heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
MAINTENANCE
Use only AEG accessories and spare parts. Should
components need to be exchanged which have not been
described, please contact one of our AEG service agents (see
our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the ten-digit No. as well as the machine type printed on
the label and order the drawing at your local service agents or
directly at: AEG Elektrowerkzeuge, Max-Eyth-Straße 10,
D-71364 Winnenden, Germany.
SYMBOLS
Accessory - Not included in standard
equipment, available as an accessory.
Remove the battery pack before starting any
work on the machine.
*1 Measured according to AEG norm N 877318
*2 The values stated are reference values. Actual values might differ, “depending on the material and quality of the screws.