manualshive.com logo in svg

AEG ProSteam LR73CW86, User Manual, Page: 40 / 44

Share
Download
AEG ProSteam LR73CW86 User Manual Download Page 40

17. QUICK GUIDE

17.1 Daily use

1

2

3

Connect the mains plug to the mains

socket.
Open the water tap.
Load the laundry.
Pour the detergent and other treatment

in the proper compartment of the

detergent dispenser.
1. Push the Aan/Uit - Marche/Arrêt 

button to turn the appliance on. Turn

the programme dial to set the desired

programme.

2. Set the desired options by means of

the corresponding touch buttons. To

start the programme, touch the Start/
Pauze - Départ/Pause   button.

3. The appliance starts.

At the end of the programme, remove the

laundry.
Push the Aan/Uit - Marche/Arrêt 

button to turn the appliance off.

17.2 Cleaning the drain pump filter

1

3

2

180˚

2

1

Clean the filter regularly and, especially,
if the alarm code 

 appears on the

display.

17.3 Programmes

Programmes

Load

Product description

MixLoad 69min

5 kg

Cotton and synthetic items. This pro‐

gramme ensures a good washing per‐

formance in a short time.

www.aeg.com

40

Summary of Contents for ProSteam LR73CW86













































Reviews:

No comments