background image

• Do not exceed to liquid detergent

dose indicated on the flap.

• Do not set the prewash phase.

• Do not set the delay start function.

5. Measure out the detergent and the

fabric conditioner.

6. Carefully close the detergent

dispenser.

Make sure that the flap does not cause a

blockage when you close the drawer.

12.5 Setting a programme

1. Turn the programme dial to select the

desired washing programme. The

related programme indicator comes

on.

The indicator of the Start/Pauze - Départ/

Pause button flashes.

The display shows the maximum

declared load for the programme, the

default temperature, the default spin

speed, the washing phase indicators

(when available) and an indicative

programme duration.

2. To change the temperature and/or

the spin speed, touch the related

buttons.

3. If desired, set one or more options by

touching the related buttons. The

related indicators come on in the

display and the given information

changes accordingly.

In case a selection is not

possible, no indicator

comes on and an acoustic

signal sounds.

12.6 Starting a programme

with the delay start

1. Touch the Startuitstel - Départ Différé

button repeatedly until the display

shows the desired delay time. The
indicator   goes on.

2. Touch the Start/Pauze - Départ/

Pause button.

The appliance starts the countdown of

the delay start.

When the countdown is completed, the

programme starts.

The ProSense estimation

starts at the end of the

countdown.

Cancelling the delay start

after the countdown has

started

To cancel the delay start:

1. Touch the Start/Pauze - Départ/

Pause button to pause the appliance.

The related indicator flashes.

2. Touch the Startuitstel - Départ Différé

button repeatedly until the display
shows  .

3. Touch the Start/Pauze - Départ/

Pause button again to start the

programme immediately.

Changing the delay start after

the countdown has started

To change the delay start:

1. Touch the Start/Pauze - Départ/

Pause button to pause the appliance.

The related indicator flashes.

2. Touch the Startuitstel - Départ Différé

button repeatedly until the display

shows the desired delay time.

3. Touch the Start/Pauze - Départ/

Pause button again to start the new

countdown.

12.7 Starting a programme

Touch the Start/Pauze - Départ/Pause

button to start the programme.

The related indicator stops flashing and

stays on.

The programme starts, the door is

locked. The display shows the indicator

.

The drain pump can operate

shortly before the appliance

fills water.

ENGLISH

25

Summary of Contents for ProSteam LR73CW86













































Reviews: