Programme
Programme description
Stoom - Vapeur
Cotton, synthetic and mixed items. Special steam cycle without
washing that can be used to prepare your dried laundry for ironing
or refreshing garments worn once. This programme reduces crea‐
ses, odours and relaxes the fibres. Do not use any detergent.
When the programme is completed, quickly remove the laundry
from the drum
2)
. If necessary, remove stains by washing or using lo‐
calized stain removal. Steam programmes do not perform any hy‐
gienic cycle. Do not set a Steam programme with these types of
items:
• Items that are not suitable for tumble drying.
• Items with label "Dry clean only".
Hygiene
White cotton items. This high-performance wash programme com‐
bined with steam vapour, removes more than 99,99% of bacteria
and viruses
3)
keeping the temperature above 60°C throughout the
washing phase; with an additional action on the fibers thanks to a
vapour phase, an enhanced rinsing phase ensures a proper remov‐
al of detergent and micro-organism residues. This programme en‐
sures also a proper reduction of pollens/allergenic items.
Machine clean
Maintenance cycle with hot water to clean and freshen the drum and
to remove residue that may cause odour. Before running this cycle,
remove all items from the drum. In the washing phase compartment
of the detergent dispenser, put the flap of the compartment in up‐
ward position. Pour a cup of chlorine bleach or a washing machine
cleaner in the washing phase compartment of the detergent dis‐
penser. DO NOT use both together
4)
.
1) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't
rotate or doesn't rotate properly, but this is normal for this programme.
2) If you set a Steam programme with dried laundry, at the end of the cycle the laundry can be humid.
Line dry the items for about 10 minutes. This programme does not remove particularly intense odour.
3) Tested for Staphylococcus aureus, Enterococcus faecium, Candida albicans, Pseudomonas aerugino‐
sa and MS2 Bacteriophage in external test performed by Swissatest Testmaterialien AG in 2021 (Test
Report No. 202120117).
4) After the drum cleaning, run a further rinse cycle with empty drum and no detergent to remove any
residue of bleach.
Programme temperature, maximum spin speed and maximum load
Programme
Default tempera‐
ture
Temperature
range
Reference spin
speed
Spin speed range
Maximum load
MixLoad 69min
30 °C
60 °C - 30 °C
1600 rpm
1600 rpm - 400 rpm
5 kg
Eco 40-60
40 °C
1)
1600 rpm
1600 rpm - 400 rpm
8 kg
www.aeg.com
18
