AEG OMNI 12C-PB, Original Instructions Manual

Page: 11 / 12

11
MAINTENANCE
Use only AEG accessories and spare parts. Should components
need to be replaced which have not been described, please
contact one of our AEG service agents (see our list of guarantee/
service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the Article No. as well as the machine type printed on the
label and order the drawing at your local service agents or
directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10,
D-71364 Winnenden, Germany.
SYMBOLS
Please read the instructions carefully before
starting the machine.
Remove the battery pack before starting any
work on the machine
(OMNI12C-PB, OMNI 18C-PB).
Do not dispose of electric tools together with
household waste material! In observance of
European Directive 2002/96/EC on waste
electrical and electronic equipment and its
implementation in accordance with national
law, electric tools that have reached the end of
their life must be collected separately and
returned to an environmentally compatible
recycling facility.
SPECIFIED CONDITIONS OF USE
Combined with an AEG OMNIPRO powerbase the Multifunction
head with sander pad is designed sanding wood, metal and
plastics and the Multifunction head with saw blades is designed
for cutting fl ush to a surface in wood and plastics.
Do not use this product in any other way as stated for normal
use.
APPROVAL
This application head is approved for use on the following
powerbases:
OMNI 12C-PB................................................................ 12 V-
OMNI 18C-PB................................................................ 18 V-
TECHNICAL DATA OMNI-MT
Oscillating angle left/right ..................................... 1,5/1,5 °
Deltasander no load oscillation frequency ............... 20000 min
-1
Weight according EPTA-Procedure 01/2003 ............... 374 g
Noise/Vibration Information
Total vibration values (vector sum in the three axes) determined
according to EN 60745.
Vibration emission value a
h
Sanding
OMNI 12C-PB ........................................................ 3.5 m/s
2
OMNI 18C-PB .......................................................11.5 m/s
2
Sawing (Multifunctionhead)
OMNI 12C-PB .......................................................11.6 m/s 2
OMNI 18C-PB ...................................................... 12.3 m/s 2
Uncertainty K = ....................................................... 1.5 m/s 2
For technical data and approvals of powerbases for use with
various application heads please refer to the operating
instructions of the used powerbase.
WARNING
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the
vibration emission may differ. This may signi fi cantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may signi fi cantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work
patterns.
Uncertainty K = ....................................................... 1.5 m/s
2
WARNING Read all safety warnings and all instructions,
including those given in the accompanying brochure. Failure
to follow the warnings and instructions may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory
contacting a live wire may make exposed metal parts of the
power tool live and could give the operator an electric shock.
When working in walls ceiling, or
fl oor, take care to avoid electric
cables and gas or waterpipes.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust
thoroughly, e.g. with a vacuum cleaner.
Remove the battery pack before starting any work on the
machine.
Always disconnect the plug from the socket before carrying out
any work on the machine.
SYMBOLS