Operating Instructions
43
Programme Protection
To safeguard a programme setting against unwanted changes (e. g.
program selector turned, option buttons pressed etc.), you can set the
programme protection. This prevents your washing being damaged.
3
It is possible to set or cancel the programme protection at any time
during a programme.
Selecting programme protection:
0
1.
Select the desired wash programme settings.
2.
Press the START/PAUSE button to start the programme.
3.
Press and hold down the PRE WASH and SENSITIVE buttons simultane-
ously for 5 seconds. The programme progress indicator will flash for
5 seconds; programme protection has been set.
3
As long as the programme protection is set, you cannot make any other
settings. The door cannot be opened using the DOOR/LIGHT button.
Even after the wash cycle has finished you will need to cancel the pro-
gramme protection before you can open the door.
If an attempt is made to change the selected settings during the wash
cycle by activating a button, the programme progress display will flash
for 5 seconds.
If you attempt to change the selected setting by turning the pro-
gramme selector, the programme progress display will flash until the
original setting of the programme selector is restored. The wash cycle is
not influenced in either case.
3
The programme selector must be in its original position in order to can-
cel the programme protection.
Cancelling programme protection:
0
Press and hold down the PRE WASH and SENSITIVE buttons simultane-
ously for 5 seconds. The programme progress indicator flashes for
5 seconds and then remains illuminated constantly for 5 seconds. Pro-
gramme protection has been cancelled.
