Installation and connection instructions
49
Compensate for floor unevenness
3
Automatic adjustment foot:
The rear left foot of your washing ma-
chine is designed as a spring leg. This means that it guarantees that
your unit will stand securely even at high spin speeds.
If, nevertheless, the washing machine is unstable during spinning,
please proceed as follows:
0
1.
Set the three adjusted feet at the
nominal value of 10 mm. To do
this, use the supplied special
spanner to remove the transport
safeguard.
If the automatically adjusting
foot does not reach the floor:
2.
Automatic adjustment foot (rear
left) manually for extending the
reqired dimension.
3.
If necessary, check the setting
with a spirit level.
Caution!
Never use wood, card or
similar underlays to level out minor
floor unevenness. Instead, always adjust
the adjustment foot.
