English
70
Manual
When the device is searching for a radio signal, it is not possible to adjust the time manu-
ally.
1. Press the button (3) to switch the device into standby mode.
2. Press and hold the SNOOZE/SLEEP / DIMMER button (2). The “ ” symbol starts
lashing in the display.
3. Press and hold the SNOOZE/SLEEP / DIMMER button again. The “ ” symbol disap-
pears from the display.
4. Hold the SET/MEM/M+ button (1) depressed until the year indication (YR) on the
display lashes.
• Now you can set the year (YR), the month (M), the day (D), the time display format
(12Hr/24Hr), the hours, and the minutes with the buttons
(7) and
Y-M-D (8).
• In each case, conirm the input with the SET/MEM/M+ button. The current indication
to be set lashes on the display.
NOTE:
• The input is stored automatically within approximately 30 seconds when no button is
pressed.
• With a 12 hour display the following is displayed: PM = Afternoon
• Setting of the weekday is done automatically.
Radio station tuning
1. Use the
(7) and
Y-M-D (8) buttons to tune the desired station. If you keep one
of the buttons pressed, the device searches for the next radio station. The display
shows the tuned frequency.
2. If reception is too weak, change the position of the dipole antenna in order to improve
the reception.
Preset stations
You can preset up to 10 radio stations.
1. Search for a station as described under “Radio station tuning”.
2. Keep the SET/MEM/M+ button (1) pressed. The preset location indicator lashes on
the display (e.g. P02).
3. Use the
(7) and
Y-M-D (8) buttons to select the desired preset station memory.
4. Press the SET/MEM/M+ button to preset the station.