AEG MF 1400 KE, Original Instructions Manual

Page: 26 / 81

21
MF 1400 KE
.......................................1400 W
...........................10000-23000 min
-1
............................................64 mm
....... 8, 12 mm (GB 1/4”, 1/2”)
............................................40 mm
...........................................4,9 kg
...........................................3,7 kg
............................................84 dB(A)
...........................................95 dB(A)
..............................................7 m/s
2
...........................................1,5 m/s
2
..............................................5 m/s
2
...........................................1,5 m/s
2
Rated input ...............................................................................................................
No-load-speed ..........................................................................................................
Cage stroke...............................................................................................................
Collet diameter ..........................................................................................................
Router diameter max .................................................................................................
Weight (Plunge Router) without cable ........................................................................
Weight (Fixed Router) without cable ...........................................................................
Noise/Vibration Information
Measured values determined according to EN 60745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K = 3 dB(A)) .......................................................................
Sound power level (K = 3 dB(A))...........................................................................
Wear ear protection!
Total vibration values (vector sum in the three axes) determined according to EN 60745.
Vibration emission value a
h
Plunge Router .......................................................................................................
Uncertainty K = ....................................................................................................
Fixed Router ..........................................................................................................
Uncertainty K = ....................................................................................................
English
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in
EN 60 745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify
additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
GB
Keep mains lead clear from working range of the machine.
Always lead the cable away behind you.
Never reach into the danger area of the plane when it is running.
Always use the protective shields on the machine.
Only use tools whose permitted speed is at least as high as the
highest no-load speed of the machine.
Sawdust and splinters must not be removed while the machine
is running.
Only use professionally grinded router cutters.
Only use router cutter with correct shank diameter.
Put the router back to original position after usage (loosen
clamping lever to secure cage).
Only move the workpiece in counter rotation to cutter (only
work oppositely oriented)! For security, use devices such as
safety- and pressure device, guide slide, rip fence, etc.
The dust produced when using this tool may be harmful to health
(e.g. when working oak or beech wood, stones, paint, which
could contain lead or other harmful chemicals). Do not inhale
the dust. Use a dust absorption system and wear a suitable dust
protection mask. Remove deposited dust thoroughly, e.g. with a
vacuum cleaner.
Under the effect of extreme electromagnetic interferences from
the outside, temporary variations in the speed of rotation could
arise in particular cases.
WARNING!
Read all safety warnings and all instructions, including
those given in the accompanying brochure . Failure to follow
the warnings and instructions may result in electric shock, fire
and/or serious injury. Save all warnings and instructions for
future reference.
SAFETY INSTRUCTIONS
Wear ear protectors. Exposure to noise can cause hearing loss.
Hold power tool by insulated gripping surfaces only,
because the cutter may contact its own cord. Cutting a
„live“ wire may make exposed metal parts of the power tool
„live“ and shock the operator.
Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding the
work by your hand or against the body leaves it unstable and
may lead to loss of control.
Appliances used at many different locations including open air
must be connected via a residual current operated device
(FI, RCD, PRCD).
Always wear goggles when using the machine. It is
recommended to wear gloves, sturdy non slipping shoes and
apron.
Always disconnect the plug from the socket before carrying out
any work on the machine.
Only plug-in when machine is switched off.
TECHNICAL DATA Router
Автотовары
«130»
130.com.ua