English
43
• Open the battery compartment on the back of the
remote control.
• Replace the cell by a battery of the same type
(CR 2025). Ensure correct polarity.
• Then close the battery lid.
If the remote control is not used for a prolonged period,
remove the batteries in order to prevent battery acid
leaking.
CAUTION:
Batteries are not to be disposed of together with
domestic wastes. Dispose of the used batteries at the
relevant collection bin or at your dealer’s.
WARNING:
• Do not expose the batteries to high temperatures
or direct sunlight. Never throw batteries into the
fire. There is a
danger of explosion!
• Keep batteries away from children. They are
not a
toy!
• Do not open the batteries by force.
• Avoid contact with metallic objects. (Rings, nails,
screws et cetera.) There is a
danger of short-circui-
ting!
• As a result of a short-circuit batteries may heat up
considerably or even catch fire. This may result in
burns.
• For your own safety the battery poles should be
covered with adhesive strips during transport.
• If a battery leaks do not rub the liquid into your
eyes or mucous membranes. If hands come into
contact with the liquid they should be washed
thoroughly and eyes rinsed out with clear water;
if symptoms persist please consult a doctor.
CD deck transport protection
• Please open the CD compartment (1) by pressing the
OPEN (open) button (3).
• Remove the transport protection from the CD player
if present before use.
General Operation
NOTE:
Some keys are to be found both on the device itself
and on the remote control. Keys with the same desi-
gnation have the same function.
Volume
The desired volume can be sent using the VOLUME
regulator (4).
Switch-off
The machine is switched off when the function selector
switch (8) is turned to the OFF position
.
Turn the power
switch (24) to the OFF position.
Unplug the device
.
AUX IN socket
To connect analogue replay devices. Via this socket you
can also hear the sound of other playback devices such
as MP3 players, CD players etc. through the loudspeakers.
1. Please connect the external device with a 3.5 mm
stereo jack plug to the AUX IN socket (9).
2. Turn the function selector switch (8) to CD/MP3 or
RADIO. The device switches automatically to AUX IN
operation. The radio or CD sound is switched off.
3. Through the loudspeakers you can hear the playback
of the sound from the external device; with the
VOLUME control (4) you can change the volume. The
CD buttons do not have any function.
4. For the remaining procedure please see the operating
instructions of the external sound source.
NOTE:
Adjust the volume of the external device to a comfor-
table level.
USB Connexion (11)
This device has been developed in accordance with
the latest technical developments in the USB field.
Unfortunately the large number of different types of
USB storage media on offer today makes it impossible to
guarantee full compatibility with all USB storage media.
For this reason there may be problems in rare cases
with playing back from USB storage media. This is
not a
malfunction of the device.
1. Turn the function selector switch (8) to the CD/MP3
position.
2. Insert a USB storage medium directly into the cor-
responding connection.
3. Keep the
II
PLAY/PAUSE button (6) pressed down in
order to select USB mode. USB appears in the display
.
4. After a few seconds the total number of tracks ap-
pears briefly and then playback begins. The current
song and the letters
MP3 and USB appear in the
display.
For operating instructions please see the section “Playing
CDs/MP3s”.
NOTE:
If there is no CD in the CD compartment at the same
time, the USB connection is automatically selected.
CAUTION:
Before you remove the USB storage medium turn the
function selector switch (8) to the RADIO position.
05-MC 4443 AEG.indd 43
14.09.2010 14:47:24 Uhr
