AEG LF7C8636BI User Manual Download Page 11

Page: 11 / 52

7. Close the holes with the plastic caps

you find in the user manual bag. Put the

smallest cap F in upper hole and the two

bigger caps G in lower holes.

We recommend that you keep the packaging and the transit bolts for any

movement of the appliance.

5.4 Installation on suspended

flooring

Suspended wooden floors are

particularly susceptible to vibration.
To limit vibration we recommend placing

a waterproof wooden panel, at least 15

mm thick, under the appliance. It should

be screwed to at least 2 floor beams and

should extend beyond the front feet.
If possible, install the appliance where

the floor is more stable.

5.5 Positioning and levelling

1. Install the appliance on a flat hard floor.

WARNING!

Make sure that carpets do not

stop the air circulation below

the appliance.

Bring the appliance near the

furniture recess before

levelling it. For more details,

refer to paragraph "Building

in".

2. Loosen or tighten the feet to adjust the

level.

A correct adjustment of the

appliance level prevents the

vibration, noise and the

movement of the appliance

when in operation.

ENGLISH

Summary of Contents for LF7C8636BI





















































Search results

Summary of Contents for LF7C8636BI

Reviews:

Related manuals for LF7C8636BI

Brands by name

Popular brands

AEG LF7C8636BI, User Manual

Search results

Summary of Contents for LF7C8636BI

Reviews:

Related manuals for LF7C8636BI

Brands by name

Popular brands