29
Display shows: “No inco-
ming water/Check tap &
Hose”
Tap turned off.
Turn the tap on.
Filter in the screw con-
nection of the inlet hose
is blocked.
Turn off the water tap. Un-
screw hose, take out filter
and clean it.
Water tap is blocked
with limescale or faulty.
Check the water tap and have
it repaired if necessary.
Washing machine vibrates
when operating or is noisy.
Transit packaging has
not been removed.
Remove transit packaging.
Screw feet not correctly
adjusted.
Adjust feet according to the
Installation and Connection
instructions.
Washing has not been
spun.
Only a few large items of
washing in the drum.
Always load the drum as full
as possible. Mix large and
small items.
Water is running out from
under the washing
machine.
Screw connection on the
inlet hose is leaking.
Screw the inlet hose in firmly.
Drain hose is leaking.
Replace drain hose.
Drain pump cover is not
closed properly.
Close cover properly.
Washing was caught in
the door.
Load washing carefully for
the next wash.
Emergency drain hose is
leaking.
Close off emergency drain
hose properly.
Display shows:
“Warning : EF3”.
The drain pump runs con-
stantly - even when the
appliance is switched off.
The Aqua Control anti-
flood system has re-
sponded.
Close the tap, remove the
mains plug from the socket
and inform Customer Service.
Display shows: “Excess De-
tergent”
Probably too much de-
tergent has been used.
Dose detergent exactly as in-
structed by manufacturer.
Problem
Possible cause
Remedy
