21
3.
After the wash, pull out the detergent dispenser drawer slightly to al-
low it to dry. Leave the door slightly open to air the inside of the wash-
ing machine.
If RINSE HOLD
or NIGHT CYCLE
was selected:
After a RINSE HOLD or when a program with NIGHT CYCLE has ended,
the START/PAUSE indicator flashes. “Cycle ended” and “Door locked”
appear alternately in the display.
The water must first be drained:
–
Turn the programme knob to OFF, then to DRAIN and press
the START/PAUSE key (the water is drained without spinning),
or
–
or turn the programme knob to OFF and then to SPIN. Change the
spin speed if necessary and press the START/PAUSE key (the water is
drained and the washing spun).
Setup
The special functions that can be set under Setup remain permanently
stored independent of each washing cycle – even after the appliance
has been switched off or the mains plug has been removed from the
socket.
Memory 1, 2, 3
Program combinations can be stored at program knob positions ME-
MORY 1, 2, 3 and can then be selected directly using the program knob.
To do this the desired program combination is first put together and
then stored.
Setting the Memory
Example: Program position
MEMORY 1 is to be given the
following program combina-
tion: LINEN/EASY-
CARES 40 °C, 800 rpm, with
PREWASH.
1.
Turn the program knob to LI-
NEN/EASY-CARES.
2.
Press the TEMP. key repeatedly, until 40 °C appears in the display.
3.
Press the RPM key repeatedly, until 800 appears in the display.
L I N E N / E A S Y C A R E
12.45
C y c l e e n d a t
14.37
40C 800 aýýýýýVýaýaýaýaýaýaýaýa
TEMP. C°
TEMP. C°
U/MIN.
T/MIN.
OPTION
OPTIONS
OK
OK
ZEIT
TEMPS
