Something not working?
If, during the spin cycle, the machine makes an unusual
whistling noise, different from the noise made by tradi-
tional washing machines, this is due to a new type of
motor.
If water is not visible in the drum, this is due to
the modern technology of new washing
machines that use less water than traditional
machines.
Troubleshooting
If a problem arises, you can try to solve it yourself following the
instructions below.
If you call out an engineer when one of the following problems arises,
or to repair a fault due to incorrect use, the call-out will be charged
even if requested within the guarantee period.
During machine operation the following alarm codes may be displayed:
-
E10:
problem with the water supply
-
E20:
problem with water draining
-
E40:
door open
-
EF0:
drain filter clogged
Once the problem has been eliminated, press the START/PAUSE button
to restart the programme. If after all checks, the problem persists, con-
tact your local AEG Service Force Centre.
38
Problem
The machine does not work
Possible cause
The ON/OFF button
Depress the button.
has not been depressed.
The main electrical fuse or
Replace the fuse.
the fuse in the plug has
blown.
The door is not properly
Close the door; the click
closed
(E40)
.
of the lock should be heard.
The plug is not connected.
Insert the plug.
The START button has not
Press the button.
been pressed.
The DELAY START
Check the selected delay on
option has been selected.
the display.
Solution
132992090bis.qxd 23/07/2003 11:29 Pagina 38 (Nero/Process Black pellicola)
