AEG L9FE96AS, User Manual

Page: 31 / 52

13.11 Cancelling a running
programme
1. Press the On/Off button to cancel
the programme and to deactivate
the appliance.
2.
Press the
On/Off
button again to
activate the appliance.
Now, you can set a new washing
programme.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating
the ProSense phase . The
water and the detergent are
not drained out in order to
avoid waste.
13.12 Opening the door
If the temperature and level
of the water in the drum are
too high and/or the drum
still rotates you cannot open
the door.
If is on: the water
temperature and level are
not high and it is still
possible to open the door
and add clothes.
While a programme or the delay start
operates, the appliance door is locked.
1. Touch the Start/Pause button .
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the Start/
Pause
button.
The programme or the delay start
continues.
13.13
End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
The display tells that the cycle is finished
and shows
0h00min
.
The Start/Pause button goes off.
The door unlocks and the indicator
goes off.
1. Press the On/Off button to
deactivate the appliance.
After five minutes after the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
shows the end of the last
selected programme. Turn
the programme dial to set a
new cycle.
2. Remove the laundry from the
appliance.
3.
Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5.
Close the water tap.
13.14 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the
water of the last rinse, the programme is
completed, but:
• The display shows
0 min and the
Start/Pause button starts flashing.
• The drum still turns at regular intervals
to prevent the creases in the laundry.
• The indicator is still on and the
door stays locked.
• You must drain the water to open the
door:
1. Touch the Start/Pause button:
• If you have set , the appliance
drains the water and spins.
• If you have set , the appliance
only drains the water.
2. If necessary, change the spin speed
proposed by the appliance: touch
the Start/Pause button to pause the
programme; tap on and then on
the Spin Speed bar.
ENGLISH 31