AEG L8WEC166C User Manual Download Page 52

Page: 52 / 56

20. CONSUMPTION VALUES

20.1 Introduction

See the web link www.theenergylabel.eu for

detailed information about Energy Label.

The QR code on the energy label supplied with the

appliance provides a web link to the product

information sheet. Keep the energy label for

reference together with the user manual and all

other documents provided with this appliance.

20.2 Legend

Laundry load.

h:mm

Programme duration.

kWh

Energy consumption.

°C

Temperature in the laundry.

Litres

Water consumption.

rpm

Spin speed.

Remaining moisture at the end of the cycle. The higher is the spin speed, the

higher is the noise and the lower is the remaining moisture at the end of washing

cycle.

Values and programme duration may differ depending on different

conditions (e.g. room temperature, water temperature and pressure, load

size and type of laundry, supply voltage) and also if you change the

default setting of a programme.

20.3 According to UK

Ecodesign for Energy-

Related Products and Energy

Information Regulations

Washing only

Eco 40-60 pro‐

gramme

kWh

Litres

h:mm

°C

rpm

Full load

0.980

3:50

1551

Half load

0.555

2:55

1551

Quarter load

2.5

0.175

2:25

1551

1) Maximum spin speed.

www.aeg.com

Summary of Contents for L8WEC166C

























































Search results

Summary of Contents for L8WEC166C

Reviews:

Related manuals for L8WEC166C

Brands by name

Popular brands

AEG L8WEC166C, User Manual

Search results

Summary of Contents for L8WEC166C

Reviews:

Related manuals for L8WEC166C

Brands by name

Popular brands