AEG L8WEC166C User Manual Download Page 32

Page: 32 / 56

If you change the washing

programme after closing the

door, the display could show

to indicate a

possible overload: open the

door and remove a few

garments.

13.5 Filling the detergent and

additives

Compartment for prewash phase,

soak programme or stain remover.

Compartment for washing phase.
Compartment for liquid additives

(fabric conditioner, starch).

Maximum level for quantity of liquid

additives.

Flap for powder or liquid detergent.

Always follow the

instructions that you find on

the packaging of the

detergent products, but we

recommend that you do not

exceed the maximum

indicated level (

). This

quantity will however

guarantee the best washing

results.

After a washing cycle, if

necessary, remove any

detergent residue from the

detergent dispenser.

13.6 Check the position of the

flap

1. Pull out the detergent dispenser until

it stops.

2. Press the lever down to remove the

dispenser.

3. To use powder detergent, turn the

flap up.

4. To use liquid detergent, turn the flap

down.

www.aeg.com

Summary of Contents for L8WEC166C

























































Search results

Summary of Contents for L8WEC166C

Reviews:

Related manuals for L8WEC166C

Brands by name

Popular brands

AEG L8WEC166C, User Manual

Search results

Summary of Contents for L8WEC166C

Reviews:

Related manuals for L8WEC166C

Brands by name

Popular brands