background image

4. TECHNICAL DATA

Dimension

Width/ Height/ Total

depth

59.7 cm /84.7 cm /57.5 cm

Electrical connection

Voltage

Overall power

Fuse

Frequency

230-240 V

2000 W

13 A

50 Hz

Level of protection against ingress of solid particles

and moisture ensured by the protective cover, ex‐

cept where the low voltage equipment has no pro‐

tection against moisture

IPX4

Water supply 

1)

Cold water

Water supply pressure

2)

Minimum

Maximum

0.5 bar (0.05 MPa)

8 bar (0.8 MPa)

Maximum wash load

Cotton

8 kg

Maximum dry load

Cotton

Synthetics

5 kg

3 kg

Spin Speed

Maximum spin speed

1600 rpm

1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot
connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your do‐
mestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.

5. INSTALLATION

WARNING!

Refer to Safety chapters.

5.1 Unpacking

WARNING!

Remove all the packaging

and the transit bolts before

installing the appliance.

WARNING!

Use the gloves.

1. Remove the external film. If

necessary, use a cutter.

2. Remove the cardboard top and the

polystyrene packaging materials.

ENGLISH

9

Summary of Contents for L7WEE855R





















































Reviews: