background image

Programme

Default tempera‐

ture

Temperature

range

Reference spin

speed

Spin speed range

Maximum load

Schleudern/Abpumpen

4)

-

1400 rpm
1400 rpm 

8 kg

1) According to Commission Regulation EU 2019/2023, this programme at 40 °C is able to clean normal‐
ly soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle.

For the reached temperature in the laundry, the programme duration and other data,
please refer to 'Consumption Values' chapter.
The most efficient programmes in terms of energy consumption are generally those that
perform at lower temperatures and longer duration.

2) Washing programme.
3) Washing programme and waterproofing phase.
4) Set the spin speed. Make sure it is suitable for the type of fabric being washed. If you set the No Spin
option then only the drain phase is available.

Programme options compatibility

OPTIONS

PROGRAMME

Eco 40-60

Baumwolle

 

Pflegeleicht

 

Feinwäsche 

Wolle/Seide

 

Outdoor

 

20 Min. - 3 kg

 

Daunen 

Leichtbügeln

Schleudern/Abpumpen

 

Schleudern

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flecken  

1)

 

 

 

 

 

 

Vorwäsche 

 

 

 

 

 

 

Extra Spülen 

 

 

 

 

Nur Spülen

 

Anti-Allergie 

 

 

 

 

 

 

 

 

 

ENGLISH

19

Summary of Contents for L6FBF60488









































Reviews: