AEG KO_FAVORIT 80800, User Instructions

Page: 31 / 48

Operating Instructions
31
What to do, when ...
Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call in customer service to resolve one of
the malfunctions listed here, or rectify an error made in the operation
of the appliance, the customer service engineer’s visit is not free of
charge, even during the period of guarantee.
... Error messages are displayed.
• If the multi-display shows the fault code
(2
or if the display WATER
(WATER; EAU), DOOR (DEUR; PORTE) or SPRAY ARM (SPROIE-
ARM; BRAS) lights up, you may be able to remedy the fault yourself.
After remedying the fault
(2
and the fault with the display WATER
(WATER; EAU) , press the button of the started washing programme.
The wash programme continues. If the fault code is displayed again,
contact customer service.
• For all other faults that are indicated, please contact customer serv-
ice stating the fault code.
Malfunction Possible Cause Remedy
The programme display of
the selected programme
flashes, the display
WATER
(WATER; EAU) lights up and
a constantly repeated
warning tone
can be heard.
No water runs into the dish-
washer.
Tap is blocked or furred
with lime-scale.
Clean tap.
The filter (where present)
in the threaded hose fit-
ting at the water inlet
valve is blocked.
Clean the filter in the
threaded hose fitting.
The water inlet hose is
not correctly laid.
Check hose installation.
The programme display of
the selected programme
flashes, the multidisplay
shows the fault code and
constantly repeated warn-
ing tones
can be heard.
The siphon is blocked. Clean the siphon.
The water drain hose is
not correctly laid.
Check hose installation.
The multidisplay shows the
fault code and
constantly
repeated warning tones
can be heard.
The anti-flood system
has been triggered. Close the tap and contact
customer service.