Operating Instructions
15
Adjusting Rinse Aid Dosing
3
As the dishes are washed rinse aid is released from the dispenser into
the wash water. The dose is factory set at 4, and can be adjusted from
1 to 6. Only change the setting if streaks, milky spots or dried on water
marks are visible on glasses or crockery.
0
1.
Open the door of the dishwasher.
2.
Press the rinse aid compartment
release button with your finger.
3.
Fully open the rinse aid compartment
lid.
4.
Set the dose level.
5.
Close the lid and press until it locks
into place.
6.
If rinse aid has run out, wipe up with
a cloth.
Setting the Signal Tone for the End of the Wash Pro-
gramme
You can set whether, in addition to the optical indication of the end of
the programme, a signal tone is also to be heard.
0
1.
The dishwasher must be switched off.
2.
Press the signal tone and water softener buttons simultaneously and
keep them pressed.
3.
Press the ON/OFF switch. The LED indicators for the signal tone and
water softener buttons flash.
4.
Press the signal tone button again.
The multi-display indicates the current setting:
5.
Pressing the signal tone button changes the setting.
6.
Once the multi-display indicates the required setting, press the ON/OFF
switch. The setting is then saved.
b0
Signal tone switched off
b1
Signal tone switched on (factory setting)
Summary of Contents for KO_FAVORIT 80800
Page 1: ...ÖKO_FAVORIT 80800 Dishwasher User Instructions ...
Page 46: ...46 ...
