Installation and Connection Instructions
33
If the dishwasher is installed underneath a kitchen work surface, the
original work surface of the dishwasher is to be removed as follows:
0
1.
Unscrew the screws from the posi-
tioning plates on the back (1).
2.
Slide the appliance's work surface
approx. 1 cm to the rear (2).
3.
Lift the work surface at the front (3)
and remove.
1
If the dishwasher is later used as a free-standing appliance, the original
work surface must be re-mounted.
3
The plinth on free-standing appliances is not adjustable.
• Free-standing appliances can be
fitted with a décor panel to match
the facings of other kitchen equip-
ment. The décor panels must be
obtained from the kitchen manu-
facturer. A décor frame is necessary
for installation, and can be
obtained as an accessory from the
dealer if not included in the scope
of delivery.
• Decor panel dimensions:
– Height 590 mm
– Width 581 mm
– Clamp thickness: max. 4 mm
• To ensure that thin decor panels do not flex or distort, attach them to
the door of the appliance using double sided adhesive tape.
Summary of Contents for KO_FAVORIT 4270 I
Page 1: ...ÖKO_FAVORIT 4270 i Dishwasher User Instructions ...
Page 42: ...42 ...
