AEG KH 5 G, Original Instructions Manual

Page: 8 / 74

5 5
GB
English
TECHNICAL DATA
Rotary Hammer
KH 5 G
Production code 4181 61 05...
... 000001-999999
Rated input 1100 W
Output 550 W
No-load speed 450 min -1
Speed under load max. 430 min
-1
Rate of percussion under load max. 3000 min
-1
Impact energy per stroke according to EPTA-Procedure 05/2009, Drilling / Chiselling 7,5 / 7,5 J
Impact energy per stroke (pre 2009), Drilling / Chiselling 9,0 / 9,0 J
Drilling capacity in concrete 40 mm (SDS-max)
Tunnel bit in concrete, bricks and limestone 65 mm (SDS-max)
Core cutter in concrete, bricks and limestone 105 mm (SDS-max)
Chuck neck diameter 66 mm
Gewicht nach EPTA-Prozedur 01/2014 6,4 kg
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) 93,0 dB (A)
Sound power level (Uncertainty K=3dB(A)) 104,0 dB (A)
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Hammer-drilling into concrete:
Vibration emission value a
h, HD
Uncertainty K=
16,8 m/s
2
1,5 m/s
2
Chiselling:
Vibration emission value a
h, Cheq
Uncertainty K=
16,7 m/s 2
1,5 m/s 2
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
Additional Safety and Working Instructions
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is recom-
mended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
Do not machine any materials that present a danger to health (e.g.
asbestos).
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
HAMMER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool.
Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory con-
tacting a “live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.