English
55
Cut Hair / Beard
• Select the cutting length.
• Switch the appliance on. “I” can be seen on the switch (6) and the indicator lamp lights
up green.
NOTE:
Start with the longest setting and cut your hair / beard in steps to the desired length.
Outlining and Shaving the Neck
• The clipper head allows precise outlining the shape of the beard, even in difficult to
reach places as well as a clean shaving of the hairline at the neck.
• Turn the hair clipper off with the switch (6).
• Remove the cutting length comb (1) and turn the hair clipper on again.
Thinning function
• Slide the button (2) towards “
”. The blade is partly covered.
• Only the hairs which meet the blade first are cut.
• Slide the button towards “ ” to turn off the function.
Finish Operation
• Switch off the appliance. “0” can be seen on the switch (6).
Cleaning and Maintenance
• Regular cleaning and maintenance ensures optimum results and long lifetime.
• Turn the unit off and disconnect from mains power supply, if necessary.
WARNING:
• Do not submerge the unit in water.
CAUTION:
• Do not use a wire brush or other abrasives.
• Do not use sharp or abrasive cleaning agents.
• Use the cleaning brush to remove remaining hair after use.
• Remove the attachment comb (1).
