AEG HKB64450NB, User Manual

Page: 4 / 52

or connected to a circuit that is regularly switched on
and off by a utility.
•
CAUTION: The cooking process has to be supervised.
A short term cooking process has to be supervised
continuously.
•
WARNING: Danger of fire: Do not store items on the
cooking surfaces.
•
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
•
Do not use the appliance before installing it in the
built-in structure.
•
Do not use a steam cleaner to clean the appliance.
•
If the glass ceramic surface / glass surface is cracked,
switch off the appliance and unplug it from the mains.
In case the appliance is connected to the mains
directly using junction box, remove the fuse to
disconnect the appliance from power supply. In either
case contact the Authorised Service Centre.
•
In case of hotplate glass breakage:
–
shut immediately off all burners and any electrical
heating element and isolate the appliance from the
power supply,
–
do not touch the appliance surface,
–
do not use the appliance.
•
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
•
Where the appliance is directly connected to the
power supply, an all-pole isolating switch with a
contact gap is required. Complete disconnection in
compliance with the conditions specified in
overvoltage category III must be guaranteed. The
earth cable is excluded from this.
•
When you route the mains cable, make sure that the
cable doesn't come into direct contact (for example
using insulating sleeving) with parts that can reach
www.aeg.com 4