• Touch to deactivate the function
for the cooking zones you chose and
keep the last heat setting of the
cooking zones for this pair. The
indicator goes off.
• Set the heat setting to or let the
Count Down Timer deactivate the
cooking zones. The indicator goes off.
When the function is
deactivated, the pot
detection time is 2 minutes.
4.9
Timer
Count Down Timer
You can use this function to set how long
the cooking zone operates for only this
one time.
First set the cooking zone then set the
function.
The selection of the Timer
function is possible for cooking zones
that are active and after the heat setting
is set.
To set the cooking zone:
touch
again and again until the indicator of a
necessary cooking zone comes on. When
this function is active, comes on.
To activate the function:
touch of
the timer to set the time (
00 - 99
minutes). When the indicator of the
cooking zone starts to flash slowly the
time counts down.
To see the remaining time:
set the
cooking zone with
. The indicator of
the cooking zone starts to flash quickly.
The display shows the remaining time.
To change the time:
set the cooking
zone with
. Touch or .
To deactivate the function:
set the
cooking zone with
and touch . The
remaining time counts back to
00
. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and
00
flashes. The cooking
zone deactivates.
To stop the sound:
touch .
CountUp Timer (The count up
timer)
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone (if more than
1 cooking zone operates):
touch
again and again until the indicator of a
necessary cooking zone comes on. When
this function is active, comes on.
To activate the function:
touch . The
symbol goes out and comes on.
To see how long the cooking zone
operates:
set the cooking zone with
.
The indicator of the cooking zone starts
to flash quickly. The display shows how
long the zone operates. During the first
minute the display shows the time in
seconds. After the first minute the
display shows the time in minutes.
To deactivate the function:
set the
cooking zone with
and touch or
. The symbol goes out and
comes on.
If two functions operate at
the same time, the display
shows the CountUp Timer
function first.
Minute Minder
You can use this function as a
Minute
Minder
when the hob is activated and
the cooking zones do not operate (the
heat setting display shows ).
To activate the function:
touch .
Touch or of the timer to set the
time. When the time comes to an end,
the sound operates and
00
flashes.
To stop the sound:
touch .
The function has no effect
on the operation of the
cooking zones.
4.10
STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
ENGLISH
29
EURO Appliances - euappliances.info
