background image

CONTENTS

1. 

SAFETY INFORMATION............................................................................................. 2

2. 

SAFETY INSTRUCTIONS.............................................................................................5

3. 

INSTALLATION............................................................................................................7

4. 

PRODUCT DESCRIPTION.........................................................................................11

5. 

DAILY USE.................................................................................................................. 12

6. 

HINTS AND TIPS........................................................................................................13

7. 

CARE AND CLEANING.............................................................................................13

8. 

TROUBLESHOOTING............................................................................................... 15

9. 

TECHNICAL DATA.................................................................................................... 16

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com/webselfservice

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

 Warning / Caution-Safety information

 General information and tips
 Environmental information

Subject to change without notice.

1. 

 SAFETY INFORMATION

Before the installation and use of the appliance,

carefully read the supplied instructions. The

manufacturer is not responsible for any injuries or

damages that are the result of incorrect installation or

usage. Always keep the instructions in a safe and

accessible location for future reference.

www.aeg.com

2

Summary of Contents for HC412001GB





















Reviews: